Smart heating with joined forces

Combining heat pump with gas or oil heater

Smart heating with joined forces

Blog article 26.11.2024

Trends on the heater market point to new ways to thinking. There is a good reason that heat pumps, which use electricity and energy from the environment, have become the heating solution of choice. Changing to heating with only a heat pump is often the best solution. But what about when the gas or oil heater is relatively new, and implementing a totally new system would require a longer lead time? Luckily there are concepts designed for home owners who cannot or do not want to completely replace their gas or oil heater right away.

Latest price trends for sources of fossil fuels, particularly gas, are clear indications: Using a heat pump makes sense even as a supplement to an existing heating system. The air-to-air heat pump is the one that presents interesting possibilities as a way to generate some of the essential heat through less expensive and more sustainable means. Learn here how an air-to-air heat pump in combination with a gas or oil heater can be worth it.

Air-to-air heat pump as a decentralised solution

Air-to-air heat pump

Just as with an air-to-water heat pump, the air-to-air heat pump extracts energy from the ambient air. But in this case, after the actual heat pump process, the heat is released directly to the inside air via an indoor unit, as opposed to releasing it into a heat distribution system that uses water. The system is less expensive and more flexible, since only one opening in the outer wall is needed to install the device. For example, a heat pump can be added to an often-used room such as the living room to relieve the strain on the heating system in the autumn, winter and spring. With a so-called multi-split system, multiple indoor units, meaning multiple rooms, can be operated using a single outdoor unit.

How efficient is it to combine a conventional heating system with a heat pump?

Combination

Although the air-to-air heat pump heats the air in a room, it does not consume vast amount of energy like the notorious space heaters. A space heater converts one kilowatt hour of electricity to one kilowatt of heat. On the other hand, the state-of-the-art inverter technology that is part of the heat pump enables modern systems to generate 5.2 kilowatt hours from a single kilowatt hour of electricity on average over the course of the heating period. The efficiency is expressed by the SCOP value (Seasonal Coefficient of Performance). Similar to using the space heater mentioned above, one kilowatt hour of gas is equivalent to the same amount of heat. The following illustration shows how much more efficiently a heat pump is in comparison to gas and oil.

Calculation of consumption: Comparison of price per kWh

At which times of year is heating with the air-to-air heat pump beneficial?

Seasons

In principle, an air-to-air heat pump can also be used at outside temperatures as low as -15 °C - or even as low as -25 °C with so-called hyper-heating modules. But such low temperatures are extremely rare in most parts of Germany (Refer to the bar graph showing the frequency of respective temperatures). The efficiency of the heat pump decreases to below the SCOP average at such low temperatures. In this case, the existing boiler could support heating during peaks. It is worthwhile in this case as well to check whether, despite the lower efficiency, the cost of the electricity required for the heat pump is lower than the potential cost of natural gas. Throughout most of the spring and autumn, when the moderate temperatures mean that the heat pump is especially efficient, the costs of generating heat can fall substantially. Refer to the blog article Alternatives to gas heating.

Illustration: Frequency and flexible use of heat generation in Germany

Expert support

Expert support

Get help from a pro: To ensure the highest quality and efficient operation, the air-to-air heat pump system has to be properly designed and installed by an expert in the field. Specialised companies can help you to design the best heat pump to supplement heating with fossil fuel heating on site, thus ensuring that the system best meets your needs.

Find a specialist in your area to get an independent advice on your individual options!

Find a specialist partner

Air-to-air heat pumps - Product recommendations

Products
Illustration: Product MSZ-LN shown in red

Mitsubishi Electric M-series

Our award-winning M-series offers all the benefits of modern air-to-air pumps: SCOP values up to 5.2 and energy efficient classes up to A+++ (Energy efficiency classes from A+++ to D), the highest degree of energy efficiency and the capability to provide heat at temperatures well down into the sub-zero (°C) two-digit range of outside temperatures. They also score points with highly effective filter technology, smart control via the MELCloud app, whisper-quiet operation and an innovative 3D i-see Sensor for smart air flow control.

Air-to-air heat pumps

Important information

Important information

FAPS is currently unavailable

The expert and contact search feature is currently unavailable.

As a precautionary measure, the service has been temporarily disabled.

We are working to restore the service as soon as possible and appreciate your understanding.

More interesting blog entries

Blog article