Product brochures
Project focus
Product overview
i-LIFE2 HP 0202 - 1204
i-LIFE2 HP is the new Climaveneta high head Fan-Coil built in version with EC Brush-less motor. The continuous regulation of air flow and thermal capacity, guarantees total comfort and high energy savings. i-LIFE2 HP is the ideal solution for ducted systems and installations in tertiary and commercial sectors.
Topic overview
Product features
Features- High pressure centrifugal fan unit for ducted system.
- High efficiency EC motor. Modulating speed centrifugal fan and air flow regulation. Energy consumption reduced by more than 50%
- Coils with aluminium fins and copper pipes.
- Configurations for 2 and 4 pipe Systems.
- Left-hand water connections, easy convertible into right-hand, by simply turning the coil.
- Air filter on all models.
- Structure in thick galvanised steel for maximum resistance to rust.
- Auxiliary drain pan with thermal insulation for all Horizontal versions, made of galvanized steel.
- Plastic drain pan for all versions.
Produkt-Informationen
Produkt-Informationen- DLIV - built-in version, low air intake, vertical installation.
- DFIO - built-in version, front air intake, horizontal installation
- DFIV - built-in version, front air intake, vertical installation
- DLIO - built-in version, low air intake, horizontal installation
- Additional coil 2-way/3-way valve unit
- Main coil 2-way/3-way valve unit
- Hot water coil kit
- Kit control board to manage 0-10V or 3 points modulating valve unit
- Kit RS485 - interface for Building Management System
- Kit Gateway interface for MyHome Bticino System, in combination with i(HB) Powerboard and Controls EK/EKW e IK.
- Hose kit
- Plenum kit with round, straight or 90° air ducts.
- Kit i-HB powerboard for units with EC motor and IKW, EKW Controls
- Condensation drain pump with float switch supplied as standard.
- Horizontal and vertical fan coil auxiliary tray
ATW-EC wall mounted thermostat
Thermostat with set point regulation (temperature indication for ATW only). Mode button (OFF/COOLING/HEATING/AUTO) and fan speed button (Max/Med/Min/AUTO).
Main and additional coil valves ON/OFF control in cooling/heating operation (for 2 or 4 pipes installation). Electric heater control in 2 pipes systems (ATW only).
Remote room air temperature probe in AT-EC (on-board sensor in ATW-EC) and remote water temperature probe.
Proportional control 0-10Vdc of the fan speed.
Digital input configurable as: window contact, economy, heating or cooling remote changeover.
Periodic ventilation set. HOT START function (heating mode only). TOO COOL function (cooling mode only).
Blue LEDs indicates system’s turning-on, mode and fan speed.
230V~ or 24V~ 50-60Hz power supply.
The ATW-EC thermostat cannot be connected in BMS centralized management system.