Product brochures
Project focus
Product overview
a-LIFE3 0102 - 1004
The a-LIFE3 fan-coil has been specifically developed to adapt to every environment thanks to its modern and minimal design which is result of the full experience and MEHITS know-how on this range of products.
Centrifugal fan with 6 speed via auto-transformer. Thanks to the different versions, with cabinet or built in, low air intake or front air intake, vertical or horizontal installation, a-LIFE3 units are the perfect solution for any system request.
Topic overview
Product features
Features- Centrifugal Fan with double air inlet, to ensure the best performances with the best acoustic emissions.
- Multi speed directly coupled electric motor;
- 6-speed autotransformer;
- Coils with aluminium fins and copper pipes.
- Coil with large frontal area that achieves high air flow with very low pressure drops.
- Left-hand water connections, easy convertible into right-hand, by simply turning the coil.
- Auxiliary drain pan with thermal insulation for all Horizontal versions, made of galvanized steel.
- Plastic drain pan for all versions.
- Configurations for 2 and 4 pipe Systems.
- Air filter on all models.
- Automatically closing flap to cover and protect electric controls from dripping water (in conformity with directive 60335-2-40).
Produkt-Informationen
Produkt-Informationen- DLIV - built-in version, low air intake, vertical installation.
- DLMV - version with cabinet, low air intake, vertical installation
- DLMO - version with cabinet, low air intake, horizontal installation
- DFMV - version with cabinet, front air intake, vertical installation
- DFIO - built-in version, front air intake, horizontal installation
- DFIV - built-in version, front air intake, vertical installation
- DLIO - built-in version, low air intake, horizontal installation
- DFMO - version with cabinet, front air intake, horizontal installation
- Hot water coil kit
- Kit Bus Adapter for BMS
- Kit RS485 - interface for Building Management System
- Kit Gateway interface for MyHome Bticino System, in combination with i(HB) Powerboard and Controls EK/EKW e IK.
- Interface SPB Kit
- Kit control board to manage 0-10V or 3 points modulating valve unit
- 2 & 3 Way Valves for main and additional coil with ON/OFF, PWM, 0-10V or 3P Motor.
- Kit LIFE BOX
- Plenum kit with round, straight or 90° air ducts.
- Air intake grille kit
- Horizontal and vertical fan coil auxiliary tray
- Electrical Heaters
AT on board thermostat / ATW wall mounted thermostat
Mode button (OFF/COOLING/HEATING/AUTO) and fan speed button (Max/Med/Min/AUTO).
Thermostat with set point regulation (temperature indication for ATW only).
Main and additional coil valves ON/OFF control in cooling/heating operation (for 2 or 4 pipes installation).
Electric heater control in 2 pipes systems (ATW only). Control of traditional or PWM modulating valve units.
Remote room air temperature probe in AT (on-board sensor in ATW) and remote water temperature probe.
Digital input configurable as: window contact, economy, heating or cooling remote changeover.
Periodic ventilation set (AT only).
Configuration dip switch. TTL serial port with Modbus RTU protocol for installation in BMS systems (BusAdapter required).
HOT START function (heating mode only). TOO COOL function (cooling mode only).
Blue LEDs indicates system’s turning-on, mode and fan speed.