Product brochures
Project focus
Product overview
a-LIFE2 HP 0302 - 1204
a-LIFE2 HP are professional Climaveneta branded high-head fan coils. The enhanced motor and the built-in version make these units ideal for ducted systems in tertiary and commercial sectors.
EUROPE
CE
50 Hz
Topic overview
Product features
Features- High pressure centrifugal fan unit for ducted system.
- Multi speed directly coupled electric motor;
- Configurations for 2 and 4 pipe Systems.
- Structure in hot galvanised steel for maximum resistance to rust;
- Left-hand water connections, easy convertible into right-hand, by simply turning the coil.
- Air filter on all models.
- Auxiliary drain pan with thermal insulation for all Horizontal versions, made of galvanized steel.
- Plastic drain pan for all versions.
Produkt-Informationen
Produkt-Informationen- DLIV - built-in version, low air intake, vertical installation.
- DFIO - built-in version, front air intake, horizontal installation
- DFIV - built-in version, front air intake, vertical installation
- DLIO - built-in version, low air intake, horizontal installation
- Hot water coil kit
- Main coil 2-way/3-way valve unit
- 2 & 3 Way Valves for main and additional coil with ON/OFF, PWM, 0-10V or 3P Motor.
- Kit control board to manage 0-10V or 3 points modulating valve unit
- Kit RS485 - interface for Building Management System
- Kit Bus Adapter for BMS
- Kit Gateway interface for MyHome Bticino System, in combination with i(HB) Powerboard and Controls EK/EKW e IK.
- Interface SPB Kit
- Heating element kit
- Condensation drain pump
- Horizontal and vertical fan coil auxiliary tray
- Hose kit
- Straight and angular (90°) plenum kits for inlet air
- Plenum kit with round, straight or 90° air ducts.
ATW wall mounted thermostat
Mode button (OFF/COOLING/HEATING/AUTO) and fan speed button (Max/Med/Min/AUTO).
Thermostat with set point regulation (temperature indication for ATW only).
Main and additional coil valves ON/OFF control in cooling/heating operation (for 2 or 4 pipes installation).
Electric heater control in 2 pipes systems (ATW only). Control of traditional or PWM modulating valve units.
Remote room air temperature probe in AT (on-board sensor in ATW) and remote water temperature probe.
Digital input configurable as: window contact, economy, heating or cooling remote changeover.
Periodic ventilation set (AT only).
Configuration dip switch. TTL serial port with Modbus RTU protocol for installation in BMS systems (BusAdapter required).
HOT START function (heating mode only). TOO COOL function (cooling mode only).
Blue LEDs indicates system’s turning-on, mode and fan speed.