Application brochure
Informative data act
Product overview
R454B supporting documents
i-BX-Y 004M - 035T
Outdoor unit for the production of chilled/hot water with variable speed (Inverter Driven) Scroll compressors, optimized for R410A in a single-circuit configuration, axial-flow fans, condensing coil with copper tubes and aluminum fins, plate heat exchanger on water side and electronic expansion valve as standard equipment.
Flexible and reliable unit; it easily adapts itself to different process cooling applications thanks to the precise temperature control together with the use of inverter technology. The high performance’s level, both at full and partial load, is achieved thanks to the accurate unit’s design and to the use of variable speed (inverter) motor.
i-BX-Y chillers are used in many industrial applications, even completely different from each other, without making any compromises.
EUROPE
Topic overview
Product features
Features
ErP READY
The highest level of efficiency at part load, thanks to the inverter technology, can meet and exceed the minimum seasonal energy performance ratio, SEPR, in accordance with the eco-sustainable design requirements for all products using energy. For this reason, the unit represents the best choice for all the hydronic application on the industrial market.
SYSTEM EFFICIENCY
The unit has been designed as a plug & play system and all components are regulated using proprietary control logic for the utmost efficiency.
HIGH EFFICIENCY AT PARTIAL LOADS
High efficiency at partial loads using DC inverter technology to modulate compressor operation and low energy consumption during the operating hours.
HIGH EFFICIENCY COMPONENTS
The electronic thermostatic valve and the hydronic kit, with an inverter driven water pump and modulating fan speeds, both contribute to improving performance and reducing power consumption and come as standard.
WIDE OPERATING RANGE
Full load operation is ensured with outdoor air temperatures up to 46°C during summer and down to -10°C outdoor air temperatures during winter. Production of evaporator leaving water temperature from -8°C to 20°C.
INTEGRATED HYDRONIC MODULE
The integrated hydronic module includes all the water circuit components (anti-freeze electrical heater on plate heat exchanger, air vents, flow switch, water filter, safety valve, EC water pumps, expansion tank) which optimizes installation space, time, and costs.
Produkt-Informationen
Produkt-Informationen- B - Basic
- Remote keyboard
- Cascade management kit
- Copper-Aluminum heat exchanger coils with epoxy treatment
- Copper-Copper heat exchanger coils
- Buffer tank
- Serial card RS485 for ModBus
- Rubber anti-vibration mounting kit
NADISYSTEM
The keypad features function controls and a complete LCD display for viewing data and activating the unit, via a multilevel menu. The electronic board allows you to manage:
-Wired remote keypad, backlit display complete with remote temperature
-outdoor air temperature sensor on board for climatic curve
- hot water production by external three-way valve (accessory)
-electric heater for possible integration for HW tank
-gas boiler or electric heater in substitution or in addition for space heating
-night mode to limit the noise level of the units. Noise level is reduced limiting the maximum speed of the compressor and fans.
-up to 4 heat pumps in cascade (with the accessories N-CM)
-the defrost adopts a proprietary self-adaptive logic, which features the monitoring of numerous operational parameters. This allows to reduce the number and duration of the defrost cycles, with a benefit for the overall energy efficiency.
